Call Us

+91 8108306631

Send Us Mail

[email protected]

ASTM A193 B6X Fasteners Supplier

Neelkamal Fasteners is an appreciated exporter and quality manufacturer of ASTM A193 B6X Fasteners in a broad range. Fasteners are components for the temporary association of two mechanisms. It is formed in various forms and dimensions as per application needs. Standard sizes of the Fasteners are accessible with a custom-size design. Our Fasteners are accepted in the large industrial sector due to excellent quality that is maintained according to standards defined. The number of applications uses these Fasteners at less expensive rates, and there is an increase in demand with their effective performance.

ASTM A193 B6X Fasteners are formed with the specification of ASTM A193 and B6X grade material in threaded form. The material B6X is a 13 per cent Chromium Stainless Steel alloy with an adequate amount of Nickel, Manganese and Silicon. It is known as grade 410 material illustrating galling protection in some uses. They are corrosion-proof in mild reducing media and enhanced with outstanding tensile material.

Properties of ASTM A193 B6X Fasteners:

  • Cost-effective
  • Heavy-Duty
  • Wear-resistant
  • High performance

ASTM A193 B6X Fasteners:

ASTM A193 B6X Fasteners are produced using high-quality material. They are formed in Nuts, Bolts, Anchors, Studs, Washers and many other forms. A variety of shapes, sizes and structures is available to use in multiple applications. These Fasteners are proposed with great durability and extended serving life. Threads and dimensions are accurate and precise. These Fasteners possess toughness and withstand high pressure.

Purpose of ASTM A193 B6X Fasteners:

These Fasteners are designed for mild erosive situations where the temperature is high and higher strength is needed. These fasteners are exploitable in moderate corrosive acids and alkaline solutions. They are used in various chemical processes in the chemical, gas, food industry. These Fasteners are resistant to heat corrosion, and the resistance increase with raising temperatures. Other oxidation surroundings like steam, hot gas, dry air and water are resisted to reduce the fasteners. They are excellent to support radial loads in addition to axial loads with excellent tensile strength. Also, the greater machinability with higher working pressure and temperatures increase its reliability.

Uses:

These Fasteners are used in chemical, oil refinery, petrochemical, food industry, gas and pharmaceutical industry.

Specification For ASTM A193 B6X Fasteners

Standard ASTM A193 / ASME SA193
Bolt / Screw Size M3 – M56 | 3/6″ to 2″ | Custom Sizes
Nuts Size M3 – M56 | 3/6″ to 2″ | Custom Sizes
Washers Size M3 – M56 | 3/6″ to 2″ | Custom Sizes
Machine Screws Size M1.6 – M12
Self Tapping Screw Size No.2 – No. 14
Length 3 mm to 200 mm
Threads UNF, BSW, BSF, METRIC, UNC, or as required
Fasteners
  • DIN : DIN 934, DIN 931, DIN 970, DIN 933
  • UTS : UNEF, NPT, UNC, UNS, UNF, NPTF
  • ISO : JIS standards, ISO 4033, ISO 4032,
  • ANSI – American National Standards Institute
  • ASME B18.5
  • ANSI B 28.2.4 1M
  • as per defined in ASME B16.5 standard SS 304 Stud Bolt length
  • ANSI B 18.2.4 2M
  • as per defined in ASME B18.2.2 SS 304 Hex nuts
Form Hex, Threading, Square, Round as per Gauge Etc.
Raw materials Source JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin,etc.
Threads Configuration ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Certification Dual Certified As per ASTM & ASME Codes
Dimensions DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3
Threads Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically
Test Certificate as per EN 10204 / 3.1 Manufacturer Test Certificate
Additional Certifications PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
Production process M24-M100: hot forging , M2-M24: Cold Froging, for custom-made connecting element machining and CNC
ASTM A193 B6X Fasteners

Various Types of ASTM A193 B6X Fasteners

Bolts

ASTM A194 Grade 6X Nuts

Nuts

ASTM A193 B6X Bolts

washers

Stainless Steel Washer

screw

Stainless Steel Screws

Stud Bolts

Stainless Steel Stud Bolt

rivet img

Stainess Steel Rivet

CONTACT US TO GET A QUICK QUOTE

If you require any further information, Please do not hesitate to contact us.

Ready Stock Of ASTM A193 B6X Fasteners

  • A193 SS B6X Fasteners 
  • ASME SA193 B6X Stainless Steel Fasteners 
  • ASTM A193 B6X Nuts Fasteners 
  • SA193 Stainless Steel Gr B6X Fasteners 
  • ASTM A193 Stainless Steel B6X Fasteners 
  • Large Range of ASTM A193 Fasteners Grade B8
  • ASME SA193 Gr B6X Fasteners 
  • ASTM A193 SS B6X Fasteners 
  • ASTM A193 B6X Fasteners 
  • Type of ASME SA193 B6X Fasteners 
  • ASTM A193 B6X Anchor Bolts 
  • ASTM A193 B6X Fasteners 
  • SA193 Gr.B6X Fasteners 
  • A193 SS B6X Fasteners 
  • ASTM A193 Grade B6X Fasteners
  • ASTM A193 B6X SS Fasteners 
  • A193 Stainless Steel B6X Fasteners 
  • ASME SA193 Stainless Steel Gr B6X Fasteners 
  • ASTM A193 Stainless Steel B6X Fasteners Grades Chart Pdf
  • A193 Stainless Steel B6X Anchor Fasteners Exporter
  • ASME SA193 B6X Stainless Steel Fasteners 
  • A193 Grade B6X Metric Fasteners 
  • SA193 Gr.B6X Fasteners 
  • ASME SA193 Grade B6X Fasteners 
  • A193 SS B6X Fasteners 
  • SA193 Gr B6X Fasteners 
  • A193 B6X Industrial Fasteners 
  • Check ASTM A193 Gr B6X Fasteners Sizes
  • ASTM A193 Grade B6X Stud Bolts 
  • ASTM A193 B6X SS Nut Bolt And Marine Fasteners 
  • ASME SA193 Gr B6X Fasteners  
  • ASTM A193 Stainless Steel B6X Fasteners 
  • A193 SS B6X Bolts and Nuts 
  • ASTM A193 B6X Fasteners 
  • ASTM A193 B6X Fasteners Manufa

ASTM A193 B6X Hex Bolt Dimension

NOMINAL SIZE (D) BODY DIAMETER HEAD THICKNEASTM A193 ACROASTM A193 THE FLATS ACROASTM A193 CORNERS
D (MAX) D (MIN) H (MAX) H (MIN) F (MAX) F (MIN) C (MAX) C (MIN)
m10 10.00 9.78 6.63 6.17 17.00 15.73 18.48 17.77
m12 12.00 11.73 7.76 4.24 19.00 17.73 20.78 20.03
m14 14.00 13.73 9.09 8.51 22.00 20.67 24.25 23.35
m16 16.00 15.73 10.32 9.68 24.00 23.67 27.71 26.75
m20 20.00 19.67 12.88 12.12 30.00 29.16 34.64 32.95
m24 24.00 23.67 15.44 14.56 36.00 35.00 41.57 39.55
m30 30.00 29.67 19.48 17.92 46.00 45.00 53.12 50.85
m36 36.00 35.61 23.38 21.63 55.00 53.80 63.51 60.79
m42 42.00 41.38 26.97 25.03 65.00 62.90 75.06 71.71
m48 48.00 47.38 31.07 28.93 75.00 72.60 86.60 82.76
m56 56.00 55.26 36.2 33.80 85.00 82.20 98.15 93.71
m64 64.00 63.26 41.32 38.68 95.00 91.80 109.70 104.65
m72 72.00 71.26 46.45 43.55 105.00 101.40 121.24 115.60
m80 80.00 79.26 51.58 48.42 115.00 111.00 132.72 126.54
m90 90.00 89.13 57.74 54.26 130.00 125.50 150.11 143.07
m100 90.00 99.13 63.9 60.10 145.00 140.00 167.43 159.60

Size Chart of ASTM A193 B6X Nuts

Nut Size (mm)
Diameter* (mm)
Height (mm)
Hex Nut
Jam Nut
Nylock Nut
2mm
4
1.6
1.2
2.5mm
5
2
1.6
3mm
5.5
2.4
1.8
4
4mm
7
3.2
2.2
5
5mm
8
4
2.7
5
6mm
10
5
3.2
6
7mm
11
5.5
3.5
8mm
13
6.5
4
8
10mm
17
8
5
10
12mm
19
10
6
12
14mm
22
11
7
14
16mm
24
13
8
16
18mm
27
15
9
18.5
20mm
30
16
10
20
* This is the diameter across the flats. It is also the size of wrench to use.

Dimensions of ASTM A193 B6X Heavy Hex Nuts

Nominal Size or Basic Major Thread Diameter
F
G
H
Width Across Flats
Width Across Corners
Thickness
Basic
Max
Min
Max
Min
Basic
Max
Min
1/4
.2500
1/2
.500
.488
.577
.556
15/64
.250
.218
5/16
.3125
9/16
.562
.546
.650
.622
19/64
.314
.280
3/8
.3750
11/16
.688
.669
.794
.763
23/64
.377
.341
7/16
.4375
3/4
.750
.728
.866
.830
27/64
.441
.403
1/2
.5000
7/8
.875
.850
1.010
.969
31/64
.504
.464
9/16
.5625
15/16
.938
.909
1.083
1.037
35/64
.568
.526
5/8
.6250
1-1/16
1.062
1.031
1.227
1.175
39/64
.631
.587
3/4
.7500
1-1/4
1.250
1.212
1.443
1.382
47/64
.758
.710
7/8
.8750
1-7/16
1.438
1.394
1.660
1.589
55/64
.885
.833
1
1.0000
1-5/8
1.325
1.575
1.876
1.796
63/64
1.012
.956
1-1/8
1.1250
1-13/16
1.812
1.756
2.093
2.002
1-7/64
1.139
1.079
1-1/4
1.2500
2
2.000
1.938
2.309
2.209
1-7/32
1.251
1.187
1-3/8
1.3750
2-3/16
2.188
2.119
2.526
2.416
1-11/32
1.378
1.460
1-1/2
1.5000
2-3/8
2.375
2.300
2.742
2.622
1-15/32
1.505
1.433
1-5/8
1.6250
2-9/16
2.562
2.481
2.959
2.828
1-19/32
1.632
1.556
1-3/4
1.7500
2-3/4
2.750
2.662
3.175
3.035
1-23/32
1.759
1.679
2
2.0000
3-1/8
3.125
3.025
3.608
3.449
1-31/32
2.013
1.925
2-1/4
2.2500
3-1/2
3.500
3.388
4.041
3.862
2-13/64
2.251
2.155
2-1/2
2.5000
3-7/8
3.875
3.750
4.474
4.275
2-29/64
2.505
2.401
2-3/4
2.7500
4-1/4
4.250
4.112
4.907
4.688
2-45/64
2.759
2.647
3
3.0000
4-5/8
4.625
4.475
5.340
5.102
2-61/64
3.013
2.893
3-1/4
3.2500
5
5.000
4.838
5.774
5.515
3-3/16
3.252
3.124
3-1/2
3.5000
5-3/8
5.375
5.200
6.207
5.928
3-7/16
3.506
3.370
3-3/4
3.7500
5-3/4
5.750
5.562
6.640
6.341
3-11/16
3.670
3.616
4
4.0000
6-1/8
6.125
5.925
7.073
6.755
3-15/16
4.014
3.862

ASTM A193 B6X Hex Nuts Dimension

Nominal Size or Basic Major Thread Diameter
F
G
H
Width Across Flats
Width Across Corners
Thickness
Basic
Max
Min
Max
Min
Basic
Max
Min
1/4
.2500
7/16
.438
.428
.505
.488
7/32
.226
.212
5/16
.3125
1/2
.500
.489
.577
.557
17/64
.273
.258
3/8
.3750
9/16
.562
.551
.650
.628
21/64
.337
.479
7/16
.4375
11/16
.688
.675
.794
.768
3/8
.385
.365
1/2
.5000
3/4
.750
.736
.866
.840
7/16
.448
.427
9/16
.5625
7/8
.875
.861
1.010
.982
31/64
.496
.473
5/8
.6250
15/16
.938
.922
1.083
1.051
35/64
.559
.535
3/4
.7500
1-1/8
1.125
1.088
1.299
1.240
41/64
.665
.617
7/8
.8750
1-5/16
1.312
1.269
1.516
1.447
3/4
.776
.724
1
1.0000
1-1/2
1.500
1.450
1.732
1.653
55/64
.887
.831
1-1/8
1.1250
1-11/16
1.688
1.631
1.949
1.859
31/32
.999
.939
1-3/8
1.3750
2-1/16
2.062
1.994
2.382
2.273
1-11/64
1.206
1.138
1-1/2
1.500
2-1/4
2.250
2.175
2.598
2.480
1-9/32
1.ASTM A194 GR. 8
1.245
1-5/8
1.6250
2-7/16
2.438
2.356
2.815
2.686
1-25/64
1.429
1.353
1-3/4
1.7500
2-5/8
2.625
2.538
3.031
2.893
1-1/2
1.540
1.460
2
2.0000
3
3.000
2.900
3.464
3.306
1-23/32
1.763
1.675
2-1/4
2.2500
3-3/8
3.375
3.263
3.897
3.719
1-15/16
1.986
1.890
2-1/2
2.5000
3-3/4
3.750
3.625
4.330
4.133
2-5/32
2.209
2.105
2-3/4
2.7500
4-1/8
4.125
3.988
4.763
4.546
2-3/8
2.431
2.319

ASTM A193 B6X Fasteners Chemical Composition

Grade C Mn P S Si Cr
ASTM A193 B6X 0 – 0.15% 0 – 1.00% 0 – 0.040% 0 – 0.03% 0 – 1.00% 11.5 – 13.5%

ASTM A193 B6X Fasteners Mechanical Properties

Grade Diameter Tensile Strength Yield Strength Elongation Reduction Hardness
Grade B6X Up to M100, inclusive 620 485 16 50 26 HRC
Oil and Gas Industry
Power Generation Industry
Chemical Industry
Food Processing Industry

We Serve Application Industry

Countries We Export To

United States, Malaysia, Puerto Rico, Lithuania, Norway, Libya, Gambia, Namibia, New Zealand, Pakistan, Tunisia, United Kingdom, Belarus, Singapore, Mongolia, Serbia, Nigeria, Azerbaijan, Brazil, Canada, Egypt, Sweden, Morocco, Poland, Hong Kong, Chile, Iran, Switzerland, Mexico, Peru, France, Tibet, Zimbabwe, Costa Rica, Venezuela, Jordan, Taiwan, South Africa, Algeria, Hungary, Australia, Iraq, Mexico, Finland, Czech Republic, Kuwait, Nigeria, Oman, Bhutan, United Arab Emirates, Estonia, Indonesia, Ukraine, Colombia, Slovakia, Ireland, Sri Lanka, Italy, China, Lebanon, India, Belgium, Saudi Arabia, Bulgaria, Macau, Greece, Netherlands, Germany, Thailand, Israel, Yemen, Ecuador, Nepal, South Korea, Kazakhstan, Croatia, Portugal, Kenya, Austria, Iran, Russia, Japan, Bahrain, Philippines, Qatar, Bangladesh, Spain, Argentina, Vietnam, Ghana, Angola, Afghanistan, Trinidad & Tobago, Chile, Romania, Turkey, Denmark, Gabon, Bolivia, Poland.

Cities We Supply

Seoul, Thane, Indore, Caracas, Sharjah, Chandigarh, Al Khobar, Bengaluru, Thiruvananthapuram, Dubai, Ho Chi Minh City, Nagpur, Chennai, Mexico City, Muscat, Lahore, Faridabad, Pune, Doha, Howrah, Kanpur, Brisbane, Montreal, Colombo, Dallas, Rajkot, Moscow, Hong Kong, Jamshedpur, Gimhae-si, Ankara, Sydney, Ulsan, Pimpri-Chinchwad, Singapore, London, Kuwait City, Kuala Lumpur, Chiyoda, Madrid, Calgary, Abu Dhabi, Noida, Granada, Milan, Gurgaon, Surat, Ahmedabad, Ludhiana, La Victoria, Hyderabad, Lagos, Ranchi, Bogota, Rio de Janeiro, Haryana, Vung Tau, Edmonton, Coimbatore, Melbourne, Istanbul, Hanoi, Secunderabad, Cairo, Perth, Houston, Karachi, Busan, Jaipur, Navi Mumbai, Los Angeles, Bhopal, New Delhi, Ernakulam, Aberdeen, Bangkok, Tehran, Nashik, Ahvaz, Geoje-si, Mumbai, Baroda, Vadodara, Dammam, Santiago, Al Jubail, Toronto, Visakhapatnam, Kolkata, Jakarta, Riyadh, Manama, Jeddah, Atyrau, Algiers, Petaling Jaya, Port-of-Spain, Courbevoie, New York.